U101-A Flowmeter
Aluminum,small body,excellent accuracy,long life service.Simple interior structure,easy maintainance.
Materials:
Body : Aluminum (Spray-Painted)
seals : Buna-N
Technical Specifications:
| Discharge rate of each revolution: 0.5L | Diameter of rotary bar: 9mm | Rotary direction of rotary bar: Clock wise |
| Diameter of cylinder cover: 72.4mm | Environmental condition:-40℃~+70℃ | Off-setting of crankshaft: 14.93mm |
| Travel of piston: 29.80-31.38mm | Adjusting range of piston quantity: 29.86mm | Minimum adjusting increasing quantity: 0.05% |
| Working pressure: 0.12Mpa-0.3Mpa | Repeat error: not exceed ±0.1% |
U101-B Flowmeter
Aluminum,external structure achieved by single body design of components,high accuracy,high flow,low repeat error,obtained UL and CE certifications.
Materials:
Body : Cast Iron (Spray-Painted)
seals : Buna-N
Technical Specifications:
| Discharge rate of each revolution: 0.5L | Rotary direction of rotary bar: Clock wise | Environmental condition:-40℃~+70℃ |
| Minimum adjusting increasing quantity: 0.05% | Working pressure: 0.12Mpa-0.3Mpa | Repeat error: not exceed ±0.1% |
U101-C Flowmeter
Cast iron,stable body,high strength,good abrasion resistance.High-accuracy device with rotary regulating valve,with external adjustment,dual oil coat to prolong service life by lip seal.
Materials:
Body :Cast lron (Spray-Painted)
seals : Buna-N
Technical Specifications:
| Discharge rate of each revolution:0.5L | Flow rate range:5L~60L/min | Accuracy:±0.2% |
| Repeat error:≤±0.1% | Environmental condition:-40℃~+70℃ |
U101-E Flowmeter
Materials:
Body :Cast lron (Spray-Painted)
seals : Buna-N
Technical Specifications:
| Discharge rate of each revolution:037L | Flow rate range:20L~220L/min | Accuracy:±0.3% |
| Repeat error:≤±0.15% | Environmental condition:-40℃~+70℃ |
U101-F Heavy Duty Meter
This Flowmeter is to measure the exact volume of the dispensed fuel. which is designed for non-commercial use only. this flowmeter is reliable ,inexpensive, simple installation and easy calibration on the workplace.
Materials:
Body :teflon
seals : Buna-N
Technical Specifications:
| Litre: 4 digits | Totalt: 8 digits | Flow rate range:20L~120L/min |
| Accuracy:±1% | Environmental condition:-40℃~+70℃ |